Information
DESCRIPTION
SOLAR REFLECTIVE PAINT is a solvent based bituminous coating, containing high quality leafing grade aluminium flake. It provides an excellent highly reflective bright silver coloured finish when dry.
USES
SOLAR REFLECTIVE PAINT provides an effective waterproof and weatherproof protective coating, particularly where exposed bituminous, steel and corrugated iron surfaces are encountered.
Application
When first applied, the film will have a slight gold colour, which will quickly turn silver as the leafing effect of the aluminium takes place.
Two coats should be applied, the second only after the first coat has dried. To avoid staining it is important that SOLAR REFLECTIVE PAINT is not applied too thickly. Do not brush excessively as this can cause softening of the substrate.
The presence of moisture on the surface or rain falling before the SOLAR REFLECTIVE PAINT has dried can also cause staining.
Cleaning of Tools
Tools may be cleaned by using white spirit or paraffin. Spillages should be wiped off surfaces before the SOLAR REFLECTIVE PAINT has set.
STORAGE
Storage life is 24 months in tightly sealed, unopened and undamaged containers, away from sources of heat.
HANDLING
SOLAR REFLECTIVE PAINT is solvent based and appropriate protective equipment should be worn to avoid skin and eye contact and breathing fumes. For further information, refer to the relevant Health and Safety Data Sheet.
EMERGENCY ACTION:
* In the event of narcosis due to inhalation of concentrated vapour - remove person to fresh air. Call for medical attention.
* Contact with eyes - thoroughly irrigate eyes with clean, cold water. Call for medical attention.
TECHNICAL DATA SOLAR REFLECTIVE PAINT
Colour Silver coating when dry
Solids Content: 52%
Specific Gravity 0.95-0.97
Viscosity 150 - 400 cps
Flashpoint 38°C
PACKAGING Available in 25 litre containers
COVERAGE
4-6 m2/litre per coat depending on porosity of substrate. 10 m2/litre on non-porous surfaces
METHOD OF USE
Preparation
All surfaces must be clean, dry and free from dust and debris. Existing bitumen coatings should be allowed to weather for at least 10 days and preferably for a few weeks before the application of SOLAR REFLECTIVE PAINT.
Stir thoroughly before use, preferably with a slow speed drill and paddle for several minutes to ensure complete dispersion of the aluminium. Apply by brush, roller or spray.
Application
When first applied, the film will have a slight gold colour, which will quickly turn silver as the leafing effect of the aluminium takes place.
Two coats should be applied, the second only after the first coat has dried. To avoid staining it is important that SOLAR REFLECTIVE PAINT is not applied too thickly. Do not brush excessively as this can cause softening of the substrate.
The presence of moisture on the surface or rain falling before the SOLAR REFLECTIVE PAINT has dried can also cause staining.
Cleaning of Tools
Tools may be cleaned by using white spirit or paraffin. Spillages should be wiped off surfaces before the SOLAR REFLECTIVE PAINT has set.
STORAGE
Storage life is 24 months in tightly sealed, unopened and undamaged containers, away from sources of heat.
HANDLING
SOLAR REFLECTIVE PAINT is solvent based and appropriate protective equipment should be worn to avoid skin and eye contact and breathing fumes. For further information, refer to the relevant Health and Safety Data Sheet.
EMERGENCY ACTION:
* In the event of narcosis due to inhalation of concentrated vapour - remove person to fresh air. Call for medical attention.
* Contact with eyes - thoroughly irrigate eyes with clean, cold water. Call for medical Attention
Specifications
-
MPN:9SOLA02500
-
EAN:5060173695170
-
Size:25L
-
Material:Bitumen/Aluminium Flake
-
Type:Roof Coating
-
Finish:Silver Aluminium
-
GTIN:5060173695170
-
Brand:Master Bitumen
-
Condition:New
-
Product Code:9SOLA02500
-
Weight:27kg
Reviews
Write a review
No reviews have been left for this product, be the first to leave a review
